潤滑アクセサリー

　 プッシュ and lock fitting is a versatile device that has been designed to provide a solution for a wide range of applications. The fitting has been manufactured from either steel or brass, both of which are known for their durability and strength. The maximum pressure could reach 5Mpa and the thread could be customized.
圧力：5Mpa
材質: 鋼または真鍮
M8、M10、M12。

Compression fittings(ストレート,elbow) are required to properly connect and combine different tubes and hoses with one another, allowing for the creation of tight and robust tube systems.The steel material used in its construction ensures that it can withstand the highest levels of pressure.The thread on the adapter can be customized to meet the specific needs of your application.

使用するのが一般的です ブラシ as lubricant applicators in lubrication systems.They are always located at the end of the lubrication line and directly at the lubrication point, The brush are used in many applications, such as chain lubrication, which will keep the chain supple and prevents corrosion.they are an inexpensive and simple.

Our in-line 圧力フィルター come in two sizes and offer 25 and 125 micron filtration. The Aluminum bowl is easy to disassemble for inspection and replacement, and the sintered brown metal elements are corrosion-resistant and effective at removing contaminants.

グリースフィルターは最大 25Mpa までの耐久性があり、スチール製です。 150 ミクロンの濾過能力を備えたこのフィルターは、グリースから粒子を捕捉して除去するのに非常に効果的です。

LS Filter could remove small particles from grease,which could be used in many systems. Cannot handle corrosive liquids. Withstands up to 25MPa working pressure.The system could fix the indicator pin or the switch to witness the working situation.

直径4mmから10mmまでのパイプ用クランプです。材質は一般鋼材の表面に亜鉛メッキを施したものですが、特殊な腐食性の箇所にはステンレス材を推奨します。

　 Assembled Hose with Protection Cover is a flexible conduit made up of high-quality materials that ensure durability and resistance to various forms of wear and tear.We could provide the customized length hose assembled based on requirement.The protective cover is also designed to be abrasion-resistant, making it useful in outdoor settings and harsh environments.

Coils, protective helixes or corrugated hoses for tube protection SS304付き

A 逆止め弁 is a type of valve that ensures that fluid flows in one direction only.The purpose of the check valve in the block is to prevent backflow from the outlet to the inlet side of the valve system.

Isohitech Lubrication can provide reservoir tanks for lubrication systems in a range of sizes from 1 liter to 4 liters.In addition to providing standard reservoir tank sizes, Isohitech Lubrication can also design and manufacture custom reservoir tanks to meet the specific needs of individual applications.

鋳造 Alunimum reservoirs can only be used for oil. The reservoirs come in metal designs,which is from 6L to 25L can be equipped with oil level switch. Additionally, it is possible to monitor the minimum or maximum oil level electrically via float switches.